2021 Reusable Concrete Cement Brick Design Road Mold Manufacturing Diy Paving Mold Home Garden Soil Concrete Path Mold

Path Maker Mold Reusable Concrete Cement Stone
Design Paver Walk Mould

Feature：

• DIY
  plastic molded paving mold is spread in Europe and America, is a
  personalized brick mold

• Laying out the effect posted up like blocks of stones

• So
  the path is more exotic, to create a style of their own garden path.

• Material:PP Resin

• Color:Black

• Size：40×40cm

How to
use this Concrete Paver Mold to build the pathways:

• Step 1:
  Mix cement with water, according to package directions. When ready to use,
  the concrete will be the consistency of oatmeal and thick enough to hold an
  edge when you slice into it with a shovel.

• Step 2:
  Fill the paver mold, scooping the concrete in with a shovel and making sure
  to fill each area.

• Step 3:
  Using rubber gloves, spread the concrete around the mold, filling in any
  gaps or low points. Tap the mold with your hand to eliminate any air
  bubbles.

• Step 4:
  Following the contours of the mold, smooth out the concrete, wiping away any
  excess.

• Step 5:
  Allow the concrete to set for a maximum of five minutes, then carefully
  remove the mold. For the next stretch, rotate the mold a quarter-turn and
  place it beside the paver just completed, angling slightly if you’re
  creating a curving pathway.

• Step 6:
  After letting the concrete cure overnight, fill the cracks with dirt and
  wash away any excess. Wet the ground around the newly formed pavers to help
  them settle

Package
Included:

• 1 x
  Concrete Slabs Path Walk Maker Mould